new products
  • N-BK7 Windows and H-K9L Windows

    Made from BK7 material, which has transparent range from 330-2100nm. The refractive index is 1.5168 at 587.6nm. The BK7 window has good performance over visible and near IR spectrum for most application.

  • High Precision Achromatic Waveplate

    Achromatic Waveplate Achromatic Waveplates(Retarders), AWP is composed of one piece of Crystal Quartz and one piece of Magnesium Fluoride, MgF2.

  • IR Windows Barium Fluoride BaF2 Window

    Barium fluoride (BaF2) shows good optical transmission over UV-IR windows in 0.15μm~12.5μm.

  • IR Windows Magnesium Fluoride MgF2 Windows

    MgF2 windows are used in the UV, visible and IR ranges, with approximately 94% transmission from 200 - 1000 nm, and approximately 95% transmission from 1-6µm

  • IR Windows Calcium fluoride CaF2 Windows

    CaF2 has transparent range from 170-7800nm. The refractive index is 1.399 at 5000nm. 1. Low absorption coefficient 2. High damage threshold, 3. Low Dispersion (with an Abbe Number of 95) 4. Low fluorescence 5. Excellent water, chemical, and heat resistance

read more
Roof Prisms


BK7 and Fused Silica Glass Amici Roof Prisms

Amici Roof Prisms
1. 90° Deviation of Beam or Image
2. Produces Inverted Image
3. 6 Arcsecond Resolution

  • product orgin:

  • shipping port:

    Fuzhou China
  • payment:

    T/T Payment, Western Union
inquiry now

BK7 and Fused Silica Glass Amici Roof Prisms

Amici prisms, also called “roof prisms” or “right angle roof prisms,” revert and invert the image as well as bend the line of sight through a 90°angle. Ideal for use in spotting scopes, and any optical instrument where it is desirable to take an inverted image from an objective, turn it right side up, and bend it through a 90° angle in order to maintain the correct visual orientation.

  • Roof prisms are suitable for applications that demand both right-angle deflection and image erection (a combination left-to-right angle deflection and top-to-bottom inversion, equivalent to a 180 degree rotation about the optical axis).
  • These are normally uncoated for use in TIR mode.
  • Protected aluminum or internal silver coatings may be specified for roof surfaces when used in wide field applications beyond TIR limits.
  • Antireflection coated entrance and exit faces are also available.

Material: BK7, Fused Silica, etc. Optical Glass
Dimension Tolerance: +0.1, -0.1mm
Surface quality: 60-40 S/D
Surface flatness: Lambda/2 @ 632.8nm
Angle Tolerance: +/-3 arc min
Clear Aperture: >85% of dimension
Bevel: <0.25mmx45°
Coating: Upon requirement

 Roof PrismAmici Roof Prisms

Different Shape, Size, Material requiremenat are available.

Request a free quote

If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!

related products
  • Optical Dove Prisms BK7 and Fused Silica Glass Dove Prisms

    Dove Prism has two applications. 1. The main application is used as a rotator. 2. Another application is used as a retroreflector.

  • Colored Glass Filters Neutral Colored Glass Filters

    Neutral Colored Glass Filters are named based on the average transmissivity characteristics in 400nm to 700nm wavelength with 2mm thick For example ZAB70 means 70%.

  • Sapphire Windows The Most Hard Material Windows Sapphire Windows

    Sapphire Windows Transmission in 0.3-5.0μm, no absorption in 2-3μm Extremely hard and durable High thermal conductivity High bulk damage threshold

  • High Precision Glass X-Cube and RGB Prisms High Precision Glass X-Cube and RGB Prisms

    X-Cube (RGB Prism) Used under any polarization state High brightness Excellent White balance

  • Glass Penta Prisms High Precision Optical Glass Penta Prisms

    Penta prisms are five-sided prisms featuring a ray deviation of 90° and a right handed image 90° Deviation of Beam or Image Right Handed Image Coating are avaliable

  • Double Convex lenses High Presion Double Convex Lenses and Bi-convex Lenses

    Double Convex Lenses, Bi-convex Lenses have two outward curved surfaces, a positive focal length and are useful for 1:1 imaging and in multi-element systems.These lenses are designed to have a focal length of f= (R1*R2)/((n-1)*(R2-R1)) 1. Supported by the Zemax Optical Design Package 2. Posistive Focal Length 3. Material upon requirement

need help

chat now

wts photonics live chat

wts photonics